Dial printing
State-of-the-art in-house dial printing: custom ranges, dual scales, units, red marks, tag numbers and your logo, printed sharp and fade-resistant.
Who we are
Tirupati Industries was set up in 1994 to meet the growing demand for reliable pressure gauges, temperature gauges and instruments. We work from Dahisar East, Mumbai.
Our range runs from very low-pressure capsule gauges to high-pressure gauges up to 3000 bar, with the accessories that go with them: snubbers, siphons, cocks, needle valves, manifolds and thermowells.
We are among the few manufacturers in India that can supply gauges up to 3000 bar with world-class accuracy.
- Experienced
- Manufacturing since 1994, with more than 50 years of experience in pressure instrumentation.
- Quality you can check
- Each gauge is built to EN 837, ASME B40.100 or IS 3624, in the range and material you specify, from SS 316 to Hastelloy C, Monel 400, Duplex and Super Duplex.
- Honest and dependable
- We tell you plainly which gauge suits your process, even when that is the simpler one.
- Documented and traceable
- Calibration certificates, test reports and material test certificates are available with your order. See our quality process.
Our history
From 1,000 sq. ft in Dahisar East to 20,000 gauges a month, exported to the UAE, Africa and Thailand, backed by more than 50 years of experience in pressure instrumentation.
- 1994
Tirupati Industries is established
The company is founded in Mumbai to make reliable pressure gauges and industrial instruments.
- 1996
Production begins
Manufacturing starts on 1,000 sq. ft in Dahisar East, Mumbai.
- 2000
State-of-the-art factory
A new facility with in-house heavy press and dial printing, for better quality and timely delivery.
- 2004
Pan-India reach
“TIPCO” make industrial instruments are recognised across India, with last-mile reach to customers nationwide.
- 2008
ISO 9001 certified and recognised by NSIC
Our quality management system is certified to ISO 9001, and the company is recognised by the National Small Industries Corporation (NSIC).
- 2012
TIPCO enters export markets
The TIPCO brand is established in emerging export markets including the UAE, Africa and Thailand.
- 2016
New facility added
A new facility increases our manufacturing capacity.
- 2021
20,000 gauges a month
Production capacity reaches 20,000 instruments a month, achieved in record time, with a customer satisfaction index above 90%.
- 2025
ISO 14001 and ISO 45001, and EEPC India recognition
Certified to ISO 14001:2015 and ISO 45001:2018, and recognised by EEPC India for engineering exports.
- 2026
ISO 9001:2015 with TÜV Rheinland, and EEPC India honour
Our quality system is certified by TÜV Rheinland, and EEPC India honours us as an emerging export company for engineering products.
Manufacturing precision
Every gauge is made, calibrated and tested in-house, to the standard and accuracy class on your order. Because the key parts are made under our own roof, we control quality and keep lead times short.
- Calibrated against reference standards traceable to national standards, through an accredited laboratory.
- Ranges from mbar to 3000 bar.
- Dial sizes from 40 mm to 250 mm, a range few manufacturers in India can make.
- Pressure and leak tested before dispatch.
- Production capacity of 20,000 instruments a month.
- Wetted parts from SS 316 to Hastelloy C, Monel 400, Duplex and Super Duplex.
- Accuracy classes: 0.1%, 0.25%, 0.5%, 1%, 1.6% and 2.5% of full scale.
Our in-house facilities
State-of-the-art facilities for the parts that decide a gauge’s accuracy, look and life.
Case and bezel manufacturing
Cases and bezels are made in our own works, so fit, finish and sealing are right for every gauge, from utility models to stainless steel and filled gauges.
Precision assembly
Movements, Bourdon tubes, diaphragm elements and pointers are assembled by skilled technicians in a clean, controlled assembly area.
Calibration and testing
Every gauge is calibrated against reference standards traceable through an accredited laboratory, then pressure and leak tested before dispatch.
Delivery timelines
Typical delivery times from the date of order acceptance. We confirm the exact date in every quote.
| Order type | Typical delivery time |
|---|---|
| Standard gauges in common ranges | 3 to 6 weeks from the date of order acceptance |
| Made to order: special range, dial or connection | 4 to 7 weeks from the date of order acceptance |
| Diaphragm seals and special materials | 6 to 9 weeks from the date of order acceptance |
| High-pressure gauges up to 3000 bar | 6 to 8 weeks from the date of order acceptance |
| Project orders with full documentation | As agreed in the project schedule |
Urgent requirement? Call customer care on +91-7045908585, Monday to Saturday, 9:30 am to 6:00 pm IST.
Management and leadership
The people who lead Tirupati Industries and stand behind every TIPCO gauge.
Mr. Ajay P. Shah
Managing Director & CEO
With a strong vision for business growth and manufacturing excellence, Mr. Ajay P. Shah leads Tirupati Industries with a focus on quality, innovation and customer satisfaction. His leadership continues to strengthen the company’s position in the pressure gauge industry, serving customers across India and international markets.
Mrs. Bela A. Shah
Head – Accounts & Finance
Mrs. Bela A. Shah leads the finance and accounts function at Tirupati Industries, overseeing financial management, accounting operations and compliance. Her focus on financial discipline, transparency and efficient administration supports the company’s sustainable growth and operational stability.
Mr. Om A. Shah
Chief Operating Officer (COO)
Mr. Om A. Shah oversees operational excellence, production management and business development at Tirupati Industries. With a focus on process improvement, manufacturing efficiency and customer requirements, he drives the company’s commitment to delivering reliable products and consistent quality.
Build your career with us
We are always glad to hear from skilled people in production, calibration, quality and sales.
Certifications
Our management systems are certified to the international standards below. CE and IBR approvals are in process. View the certificates.
ISO 9001:2015ISO 14001:2015ISO 45001:2018CE approval in processIBR approval in process
How we work
You enquire
Call, email or send the form with the range, medium and connection.
We recommend
We suggest the gauge type and material that suits your process.
You get a quote
A written quote with the specification, standard, documents and delivery time.
We make and dispatch
Your gauges are made, calibrated and tested to the agreed specification, then sent with their documents.
Talk to the people who make the gauges
Talk to us directly: